DAMPERS

Dampers are used as safety and function elements in order to dampen speed and slow down masses.

Dampers

Adjustable MC-dampers

Force 50 – 1 300 N
Stroke 10 – 500 mm
Diameter 10/22 – 10/28

MC-damper „Standard“

Force 7 – 40 000 N
Stroke 10 – 1 000 mm
Diameter 3/10 – 30/70

MC-damper With Floating Piston

Force 20 – 2 600 N
Stroke 10 – 700 mm
Diameter 4/12 – 14/40

MC-damper Without Free Travel

Force 50 – 2 600 N
Stroke 20 – 250 mm
Diameter 10/22 – 14/40

HB-damper

Force  800 – 10 000 N
Stroke 25 – 800 mm
Diameter 6/15 – 14/40

Damping Types

If different or not clearly defined damping intensities are required, we recommend the use of adjustable easylift MC-dampers.

This specification with damping over the complete stroke contains only oil. Due to the construction, there will be a small free travel when the piston rod is pulled out. The push-in and push-out speed – i. e. the effective slowing down (motion control) of the movement of a mass – can be influenced considerably by the use of different nozzles as well as by different oil viscosities.

If the installation is horizontal or undefined, the free movement of the standard specification can be inconvenient. Therefore, the easylift system also provides also a damping variety with floating piston.
The separation of the oil- and gas chamber guarantees a smooth damping movement in every required position. For the stabilization of the floating piston, it must be pressurized by at least 20N.
Depending on the position of the floating piston, the damper can be installed stable either in push- or in pull direction.

This easylift damping variety allows a controlled damping in both directions, without a free travel effect. Here, the piston moves com pletely in a fixed oil chamber.
The piston rod volume doesn’t influence the oil chamber neither with pushed-in nor with pushed-out piston rod.

With these hydraulic dampers from Bansbach easylift®, the speed in both the push-in and push-out direction can be adjusted precisely. The speed is controlled in both directions and the damping intensity can be adjusted by turning the piston rod.
Our flexible size options of HB dampers offer a wide range of damping for your application. The dampers will be pre-adjusted before the assembly into the application, allowing for adjustable damping intensity. You may also choose the connecting parts individually according to your specifications.